Payment & Shipping Terms:
|Maximum Load [KG:||2||Protection Class:||IP 20|
|H X W X D:||88 X 498 X 305 Mm, 19”||Base Frame:||Material Of 2 Mm Galvanized Steel|
|Feet:||Set Of Adjustable Feet As Standard||Earthing:||Pre-installed Flat Earthing Kit|
optical fiber distribution frame,
power distribution frame
High Density Fiber Splice Box 2U Mounting Optical Distribution Frame
Made of galvanized steel, 2 and 3 mm, powder-coated, RAL 7035.
Weight approx. 6 kg. Equipped with 36 quad adapters, 144 LC/APC pigtails and splice trays.
Cable entry from right or left side (due to dual function).
Cable exit on the left or right side (due to dual function).
Retractable front and pivoting case.
Equipped with 2 wings for bend radius control on left and right side.
Front access to connectors
Tool-free installation of the 3U sub-rack
Simple and secure routing of loose tube cables to the splice trays
Fine distribution of the fibers to the individual modules
Terminal block for transport tubes
Pivoting high-density fibre splice box, 2U, for mounting into optical distribution frames.
144 patching instead of 96 patching in 2U optical drawer.
Protection of pigtails during installation and splice welding.
With its dual function the optical fibre drawer can be used for left or right mounting.
19”/2U, H x W x D: 88 x 498 x 305 mm
Housing and bend radius controls can be fitted on right or left side.
Pivoting module can be banded on both sides.
|Base frame:||material of 2 mm galvanized steel|
|Protection class:||IP 20|
|Maximum Load [KG]:||/|
|Feet:||Set of adjustable feet as standard|
|Earthing:||pre-installed flat earthing kit|
|H x W x D||88 x 498 x 305 mm, 19”|
Contact Person: Mr. Cocoon Lee